- 积分
- 349
- 实力分
- 点
- 金钱数
- 两
- 技术分
- 分
- 贡献分
- 分
|
楼主 |
发表于 2006-8-13 23:56:41
|
显示全部楼层
Siemens S75 说:
hello, Adam, it's me Mr Foo, username : sumintoshiba in BBS
只是怕失望 说:
wait for a while,just zip it
Siemens S75 说:
ok. Is it a cracked FW 20 ?
只是怕失望 发送:
只是怕失望 说:
I used it to flash my s7c to s75v20,then I can run the PX75V1
只是怕失望 说:
where r u come from?
Siemens S75 说:
OK, i really want to thank you for helping me, ever since i made a private message to you, as i know that you're a moderator of BBS
Siemens S75 说:
I'm from Singapore. I can speak Chinese too
只是怕失望 说:
since S75 could not buy in SIN
只是怕失望 说:
did u buy it in other country?
Siemens S75 说:
No, i bought it in Singapore, a S7C with FW13 as the 1st commercial firmware
只是怕失望 说:
pls pay more attention when u flash the S7C to S75,u have to keep the battery is full
只是怕失望 说:
and what about ur cable,does it is DCR 510?
Siemens S75 说:
Yes, i have both DCA-500 & DCA-510
只是怕失望 说:
I mean it has box in the middle of the cable
Siemens S75 说:
Do i downgrade to FW20 using Winswup 4.19 ?
Siemens S75 说:
Yes, i have the DCA-510 cable, where it's able to charge the battery as well
只是怕失望 说:
in my view,S7C V13 could use the PX75V1
只是怕失望 说:
cos I got a SL75 which is SL7CV16,i patched it with PX75V1
Siemens S75 说:
Do i downgrade to FW20 using Winswup 4.19 ?
只是怕失望 说:
and I think under FW20,S75/S7C could run PX75V1
只是怕失望 说:
u neednot
Siemens S75 说:
u mean i just downgrade from the file you givingme now ?
Siemens S75 说:
in this case, do i need to downgrade the FFS & MAP as well ?
只是怕失望 说:
winswup 4.19 is used to flash the XBI/XBZ file,but the file i give u is a integration one
只是怕失望 说:
no
只是怕失望 说:
u just need flash the fw and MAP
Siemens S75 说:
What do u mean by integration one ?
只是怕失望 说:
FFS neednot
只是怕失望 说:
集成的，就是说合在一起的，WINSWUP&xbz
Siemens S75 说:
i need to use SWriteMapR65 to flash the MAP to FW 20 ?
只是怕失望 说:
u can directly use it to downgrade ur phone
只是怕失望 说:
yes ,u r roght
只是怕失望 说:
right
Siemens S75 说:
wow, it's really an interesting thing to do
只是怕失望 说:
when u upload 2 map files,power off ur phone and click the button start
只是怕失望 说:
and click the phone's power button quickly
Siemens S75 说:
oh ya, i have the fbk file of S7C FW40, can i restore it after i have calculate those Skey & BootKey ?
只是怕失望 说:
then ur phone can enter"service mode",after 1min,the map is upgrade
只是怕失望 说:
surely u can
只是怕失望 说:
any other question?
Siemens S75 说:
i do not understand the Service Mode. what does it do ?
只是怕失望 说:
I work for Maersk,asia department is in SIN
Siemens S75 说:
Oh, Freight Forwarding company
只是怕失望 说:
u power off the phone ,when u enter servcie mode ,the screen is light
Siemens S75 说:
using Papua Utilities ?
只是怕失望 说:
no ,MAERSK is the biggest shipping company
只是怕失望 说:
just use the SWriteMapR65.exe
Siemens S75 说:
ok, i'll give it a try
Siemens S75 说:
OK, regarding applying patch on V_Klay, what must i do in the 1st place ?
只是怕失望 说:
the girl write is quite clearly,u can use it for reference when u downgrade the map http://mobile.0110.cn/viewthread ... &extra=page%3D1
只是怕失望 说:
1.downgrade s7c to s75v20
只是怕失望 说:
2.flash the map to V20
传输“S75V20.rar”完成。
只是怕失望 说:
3.got the skey ,bootkey and got the vkd file which made s75 connect with vklay
只是怕失望 说:
4.try connect s7c to vklay after u copy the vkd file to the folder C:Program FilesVi-SoftV_KLaydataLoaders
只是怕失望 说:
5.if it is successed,u can use xflash backup the eep file ,u'd better backup all the files such as fullflash,ffs,eep,bootcore ,to the constant care
只是怕失望 说:
6.restore S7CV40 fw to ur phone with x65flasher
Siemens S75 说:
regarding the ESN code, i have to swap between 2 numbers each to the front right ? Example : 12345678, i need to enter 78563412 in the papua utilities, right ?
只是怕失望 说:
7.upgrade the map V40 to ur phone
只是怕失望 说:
no
只是怕失望 说:
before u run PX75V1
只是怕失望 说:
u should connect the 510 to the phone and open the soft X65Flasher
Siemens S75 说:
Since i'm in FW20, what's the purpose of backup the eepfile, fullflash, ffs, bootcore & the constant core ?
只是怕失望 说:
After u run the java successfully,u click the button connect in x65flasher,then it will automatically conculate the bootkey and creat the vkd file in the folder of it
只是怕失望 说:
for constant care,eep is the most important one,the other backup is just for the acident
Siemens S75 说:
the bootkey is refering to the ESN code ?
只是怕失望 说:
if u use the x75v1 and xflasher ,u need not use x65PapuaUtilsV075b
只是怕失望 说:
the purpose to downgrade the S7C to S75 is for the connection to x65flasher and the vkd file to VKLAY
Siemens S75 说:
ooohhhh,,, then all i need is to copy & paste the value into the Papua Utilities, in the correct place, then they will calculate the Skey & BootKey for me, right ?
只是怕失望 说:
no,repeat again,if u can use S75V1 and X65Flasher ,u need not use x65PapuaUtilsV075b
Siemens S75 说:
Then, if i flash back to S7C FW40, how do i obtain the vkd file of FW40 ?
只是怕失望 说:
if u could not use x65flasher ,After u run the java ,u open the x65PapuaUtilsV075b and click the button PX65V4,all the code is update to the blank auto
Siemens S75 说:
ok, roger that. Then, i can use Papua to tanulate the vkd file for me
只是怕失望 说:
if u can use the x65flasher after u ran the java ,the soft will calculate the bootkey autoly
只是怕失望 说:
yes
Siemens S75 说:
can i use V_Klay 3.3 to apply patch to my phone ?
只是怕失望 说:
1.px75v1+x65flasher u can connect the x65flash and got the vkd files 2.if u could not run x65flasher ,u can use px75v1+x65PapuaUtilsV075b
只是怕失望 说:
u can try it,i use 3.3
只是怕失望 说:
so tired to type so many words ,i'm not familiar with typing english,i can type Chinese quite fast
Siemens S75 说:
Pls type in Chinese, i try to understand
只是怕失望 说:
i just have to type english for the reason i'll attend a training in DENMARK after 4days which will last 2weeks i have to practice my poor english
Siemens S75 说:
since i use FW20 to use xflasher65, the vkd file will be obtained from FW20 itself, am i right to say this ?
只是怕失望 说:
the vkd files is generate by x65flasher in the folder x65flasher-1072hhV_Klay
只是怕失望 说:
u should copy it to C:Program FilesVi-SoftV_KLaydata
只是怕失望 说:
do u understand
只是怕失望 说:
?
Siemens S75 说:
yes, i totally understand about the vkd files saves into the data/loader
只是怕失望 说:
suggest u read http://mobile.0110.cn/viewthread ... &extra=page%3D1 again,it is quite clearly
Siemens S75 说:
that means i can restore my S7C FW40, the use V_Klay to apply patches ?
只是怕失望 说:
u restore fw 40 by x65flasher,and apply the patch with VKLAY
Siemens S75 说:
oh, i finally understood
只是怕失望 说:
i have to go to bed,any question,pls send the personal mail to 0110 BBS adam5237 or send mail to adam232
只是怕失望 说:
adam2323@126.com
只是怕失望 说:
good night
Siemens S75 说:
ok, thank you very much
Siemens S75 说:
good night
只是怕失望 说:
u r welcome ,gn! |
|
IP卡
狗仔卡
发表于 2006-8-4 10:23:56
显身卡
发表于 2006-8-4 15:03:55
发表于 2006-8-4 15:33:17
发表于 2006-8-4 17:25:15