- 积分
- 16
- 实力分
- 点
- 金钱数
- 两
- 技术分
- 分
- 贡献分
- 分
|
发表于 2006-11-22 20:47:50
|
显示全部楼层
Remote desktop for Mobiilles
For Java MIDP 2..0 deviices
Getting Started Guide
Remote Desktop for Mobiles software consists of two components: the server part and the
client module.
• The server part (RDM local service) should be installed on the remote computer.
• The client module should be installed on your mobile device.
To work with your computer through the mobile device, you should install both these
components.
1. Installing the client module on mobile
If you already have installed the client on your mobile device, please see next section.
You can download the client directly to your mobile device. The WAP download location is:
wap.shapeservices.com
Open the page ‘Download’ and choose right client module for your device.
If for some reason you can't download the client module directly, or error occurs at download,
you can download files from our site. Open the page ‘Download’ in your computer browser:
http://www.shapeservices.com/en/ ... &platform=midp2
2. Starting the client
If you already have started the client, please see next section.
If the client is completely installed on your mobile phone and works properly, you will see the
title screen at startup.
Before you can connect to your computer through mobile phone, you should configure access
to the Internet for third-party applications. As a rule, you should make right settings for access
point name (APN) in data service settings on the mobile phone.
Most mobile networks offer two different APNs: one for full Internet connection and another
that is a more limited set, often used for WAP only. You should configure APN for full Internet
access. Internet APN is used by third-party applications which needs direct Internet access
(such as various messengers, web browsers, email clients, etc.) or when you use mobile phone
as modem to access Internet from your PC.
Specific settings for the Internet APN for your mobile phone, you can know from support service of your
mobile network operator. We recommend you precise the following: which tariff plan is the optimal for
using third-party applications, and which settings are proper for working with full Internet access through
TCP/IP connect. If is problematic to connect via TCP/IP connection type, please select HTTP connection
type in Setup section.
3. Registration and trial
If you already registered, please see next section.
After the first launch of RDM+ you will be asked to insert the registration key, which you have
received with the purchase of the program. Please, insert the registration key into
corresponding field and select 'Register' from menu.
If you want to use RDM+ in trial mode, choose ‘Trial’ from the menu.
4. Connecting to the test server
If you can connect to the test server, please see next section.
When the client is installed and all data service settings are made completely, at first you can
try to connect to our test server. With our test server you can make sure that the client works
on your mobile device properly and all data service settings were configured correctly.
The test server entry is already added into the client address book by default. If not, you can add the
computer number "10-000-000" to address book of the client and specify the user name as "demo". No
password is required.
Choose the menu item ‘Connect’ for connection to the test server.
After successful connection, the client will display the notification message about connection to
the test server. After closing it, you will see the general list of messages. In this list the
messages about connection process, messages from the server and error messages are
displayed.
If you had connected to test server successfully, select ‘Desktop’ menu item to pass to
desktop view mode.
The test server works in demo mode. It only shows the work with the remote desktop and
displays several examples of to execute management commands. The complete list of
management commands, mouse and keyboard controls is disabled.
5. Installing the server part on computer
If you already have installed the server part, please see next section.
You should install the server part of RDM+ on all computers to which you‘re going to use for
remote access. Run the installation executable file “rdmplus.exe” and follow instruction of
installation wizard to completely install the product.
You can download this file from our site:
http://www.shapeservices.com/en/ ... &platform=midp2
Note: For correct work of the local service, you should install this software with the account having
administrator privileges on the local computer. All previous versions should be removed before
installation.
After installation is successfully completed, start the ‘RDM Control Panel’ application. You can
find this item in Windows menu ‘Start’ – ‘Programs’ – ‘Remote Desktop for Mobiles’.
The icon of RDM+ control panel is also appeared on your taskbar -
If the server part (RDM local service) works properly, it has ‘Online’ status in control panel.
6. Starting work with RDM Online Service
If you already have connected to RDM Online Service, please see next section.
The simplest way accessing your computer through mobile phone is to use our "RDM Online
Service". For starting work with "RDM Online Service", the "RDM local service" should be
running on your computer (it should have ‘Online’ status in control panel).
The local service will be connecting to the ‘RDM Online Service’ as usual Web browser (using HTTP
requests through port 80) and its not require direct access to the remote computer or others special
router settings. But if in your local network the proxy server is used, you should specify the proxy
settings before connecting to RDM Online Service. For that, click the button "Proxy" and enter all required
information. Details about proxy settings, you can get to know from your network administrator.
If your computer isn't registered in the service, you should fill the registration form while
installing the service.
Note: Please specify existing email address in registration form exactly. You will receive automatic
notification about registration to this email address. You should confirm or cancel your registration in
"RDM Online Service", by choosing one of web links in this email. Without confirmation you can't be
connecting to the service in future.
In RDM Online Service each registered computer has a special computer number assigned at
registration in the service. If connection to the ‘RDM Online Service’ has established and
registration was completed successfully, the unique computer number will be assigned to your
computer. You will see this number in the control panel with title ‘Your computer number’.
The information about your computer number can also be discovered if you select the menu
item ‘Details’ clicking the Control panel icon in task bar.
Note: Computer number "10 000 014" on the screenshot is an example. You will get your own computer
number.
7. Connecting to your computer
You should add new account which you will use for access to your computer.
Start the 'RDM Control Panel', open page 'Accounts' and click the button 'Add'. In dialog window
you should specify user name and password and confirm entered password.
You can find the icon of "RDM Control Panel" on your taskbar.
Note: The user name is case insensitive, but password is case sensitive!
Open the main menu (address book menu) on your mobile. At first start the address book is
empty. You should select the menu item ‘New address’ to add a new record into address
book.
In the new record dialog you should enter the number of computer which you received at
registration of RDM+ service while installing the server part. Then you need to enter your
account (user name and password) which you created in RDM+ control panel.
Please, save your record choosing ‘Save’ from the menu or pressing the corresponding softkey.
Select in address book new record and connect to the specified choosing the menu item
‘Connect’.
Note: After changing any parameter in Setup menu, don’t forget to save your new settings by choosing a
‘Save’ item in menu or pressing the corresponding soft-key. Otherwise your changes won’t be saved.
You can find more information about Remote Desktop for Mobiles on our site:
www.shapeservices.com/rdm_std
If you need further assistance after reading this manual, please fill out our Support form:
http://www.shapeservices.com/en/ ... p&platform=midp
2
Alternatively, you can send us an email at rdmsupport@shapeservices.com
Our Support Team will answer your email within two business days. |
|
IP卡
狗仔卡
楼主
显身卡