看看这篇文章是否对SXG75的汉化有帮助

minhao1

更新对话部分：
me：Can I update SXG75 use amss.mbn of EF81?
        My phone has already been updated to SVN26( W6250C-MMTO-1.4.33_8 )

adfree：NO. It is not working.

              If u want learn more about "why". Take an look here:
http://forum.revskills.de/

             Best Regards

adfree：For those. Who need more space.

                               
登录/注册后可看大图

             FOTA was for Update over the Air... But never used.... BenQ realized this. Since E81 for example. So they changed partition.mbn.

            This could be interessting for those. Who have Samsung NAND (64 MB).
            Instead 128 MB Toshiba...


WARNING!

Partition Override needs ever ALL files. Then only this partition.mbn is to use for further Flashing... Because partition.mbn in handset and choosen partition.mbn must be identical.

For locked/frozen Mobiles. This is not an good idea without Backup. Because you kill your SIMSecure area...

This is really only for oldest Protos. To have around 30 MB free space instead 16 MB...

E81partition.rar (210 Bytes, 下载次数: 0)

2008-11-19 08:12 上传

点击文件名下载附件



这篇文章里有amss.mbn转W5V0XX.qapp的格式。

Please read carefully! You can damage your handset!! If you want update older SG75 or SXG75 to "newer" Firmware. So you need QPST-->Software Download-->OBL Multi-image Tab Copy all files in same folder: Code: obl.mbnpbl.mbnqcsbl.mbnqcsblhd_cfgdata.mbnoemsbl.mbnoemsblhd.mbnamss.mbnamsshd.mbnpartition.mbn See Screenshots. Files are in every 3GSwup. You need only to add obl,pbl,qcsbl + Header files. Nameconvention in SXG75 3GSwup is most different. Here "Translation".                                 登录/注册后可看大图 Code: partition.mbn    = W5V0xx.qpartoemsbl.mbn       = W5V0xx.qoemsbloemsblhd.mbn     = W5V0xx.qoemsbhdamss.mbn         = W5V0xx.qappamsshd.mbn       = W5V0xx.qapphd Attention! Most early protos have only 64 MB instead 128 MB.                                 登录/注册后可看大图 So you have not enough space to update CEFS... Attached Thumbnails                                 登录/注册后可看大图                                     登录/注册后可看大图     Attached Files                                 登录/注册后可看大图 SG75_SXG75.rar (48.3 KB, 11 views)

登录/注册后可看大图

登录/注册后可看大图                                 登录/注册后可看大图                                 登录/注册后可看大图

adfree

View Public Profile

Find More Posts by adfree

Add adfree to Your Contacts

原帖地址http://forum.gsmhosting.com/vbb/showthread.php?p=3815310

注册了一个帐号 用户名：minhao1
                          密   码：123789
希望和那位Diyer询问的可以用上！

[ 本帖最后由 minhao1 于 2008-11-19 08:12 编辑 ]

beyondpara

等高手过来研究wap19::ii

tanbhnb

估计都没有人去折腾汉化了！

van_kenny

期待sg哦 wap16::ii

tanbhnb

貌似原帖的附件更多一些！

jeffsusan

不懂啊！1

crazyli55

期待SXG75汉化

为你写诗

不懂 顶上

tanbhnb

再来顶上！

198686

同样期待高手汉化》》》》》》》》》》》

tanbhnb

再来顶！

van_kenny

高手快点出没啊

tanbhnb

高人还不出来！

西门悠悠

E文不行的确挺耽误事。

b_503

等待高手过来研究

leezee

好帖。难道工程机可以刷正式版了？

zhangxxx

这只是教你用qpst升级..................

tanbhnb

重头凉到脚！wap55::ii wap70::ii
楼上的！！！！！！！！！！粉碎了偶们的希望！

van_kenny

期待 啊 啊

sillypwwq

:/kka :/kka MS最近好消息不断~~~

哈哈~~~~收藏了