Phone disconnection...
No answer from the phone
Check port number, cable, phone, mode!
---------------------------------------------
Settings -> Service mode
Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot in "Service mode" Ok
Awaiting Power On phone...
No answer on Ping
Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot Not loaded!
Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
No answer to boot load!
Check port number, cable, phone, mode!
x65flasher2013 -> flash -> new bcore -> do the job!
的信息如下:
Auto Ignition...
Transfer boot...
BOOT is loaded...
Pause 2 sec...
Getting Information...
FlashID: 0089,887E (64Mb)
CFI: 1 : 256*262144,
BCORE Cleared!
OTP ESN: A495FA96
OTP IMEI: 358941000622384
At occurrence of mistakes reduce speed of port!
Established speed 921600 Baud.
Rea由于非常钦佩楼主,不得不说声好! of segment BCORE...
BCORE segment are kept in A495FA96_A0000000_BCORE_081208153825.bin
Was BCORE versions : "main_1.0_V9"
Write down BCORE version: "main_1.0_V9"
BCORE enable...
Search of a segment EELITE...
Search of a segments EEFULL...
Find blocks: 52,76,5008,5009,5077,5121,5122,5123,320,5468
In total EEP blocks: 140
SKEY in block 5122 = "X" 12345678
BKEY in block 5468 = "X" B217D413537D5253D81354A68CDE6F1A
EEPROM Blocks saved in .\Backup\A495FA96_EEP_081208153835.eep
Boot released. Everything is closed.!